Tool for quick installation and removal of clutch shoes.

Note: For use with 3 pins clutches only (Kyosho, Mugen, HB, Sworkz...).

Instructions:

When installing clutch weights, place the spring guide (hook) under the clutch spring.

Turn the tool counter-clockwise to lift the spring above the clutch nut and push to set the inertia block in place. Then turn clockwise to pull the spring guide (hook) out from under the clutch spring. If the spring is not properly seated, simply use the upper part of the tool to push the spring into the groove of the clutch nut.

To remove the clutch shoes, simply place the spring guide (hook) under the clutch spring and turn the tool counter-clockwise to release the spring from the clutch nut groove. Then pull the tool out to remove the assembly.

Features:

• Allows clutch shoes to be removed effortlessly, without damaging either the springs or the shoes.
• Can be used to reassemble them in the same way, with a simple 1/4-turn movement.
• Ergonomic handle with 1/4″ (6.35 mm) quick-release bit holder compatible with bits for electric screwdrivers, for example.