Fan of antennas? Drop your classic tube and say hello to the LED Klinik RC NiteStick light sticks (colors available blue, green, violet, red, pink).

When Klinik RC decided to develop its own range of LED Nitesticks antenna tubes, they pulled out all the stops to make it happen! The universal mounts allow use on practically all 1/18 to 1/5 scale chassis (1/12, 1/10, 1/8...)

1/8 buggies and truggies, drift cars, crawlers, 1/5 scale. From the race track to off-road trails and drift competitions, we have what you need!

Significantly improve nighttime visibility.

Neither too bright nor too dim. Just right!

Two universal mounting options included! Standard antenna mount and under-chassis/under-lighting mount for drifters and crawlers! Fits practically all chassis!

Mount it vertically, horizontally, as you wish! Use it on any radio system with an available receiver channel!

• Ultra-low power consumption of 12 mAh.

• Designed and built to withstand RC racing.

• Waterproof and vibration resistant.

• Includes: Nitestick LED tube (color of choice), 3D-printed carbon radio housing mount, 2 universal clamp mounts, 2 titanium M3x6 screws, Klinik RC decals.

• Operating voltage 6-7.4 V

Installation:

Antenna-type mount: drill 2 holes of 2.5 mm using the 3D-printed mount as a template at the proper location. The 3x6 screws thread directly into the radio case. Nuts can be used for optimal security. Drill a hole of about 4.5 mm to pass the eyelet and wires. You may need to remove the connector pins and thread the wires inside the radio case, then reinsert the connector. Tighten the M3 mounting screw slightly to fix the tube.

Universal mount: locate the existing screws on the chassis or drill suitable holes and install clamps with screws to fix them. Tighten the M3 mounting screw slightly to fix the tube.