One of the most critical settings on 1/8 Buggies and Truggies is the droop.

Not only to be precise, but also to be consistent!

After months of research with all the tools available on the market, the Klinik RC team had a better solution. Some tools deviated by as much as a millimeter from the advertised measurements, were inconsistent and frankly of poor quality. Tolerances varied enormously! This system is accurate, consistent, super-simple, small and light to carry. 

Measuring shock absorber length is not enough. The possible inconsistencies in hubs, wishbones, tie rods, left to right and front to back are incredible.

Become more precise with the PRO Klinik RC kit. This kit works on both Buggies and Truggies!

No other parts need be purchased. Gone are the days of buying blocks and gauges from different brands to try and get a kit that works on both cars.

The Pro Droop System is machined from top-quality 3mm carbon fiber, weighs next to nothing and fits in the palm of your hand! The system comes with a handy pouch for storing components when not in use.

The “0” on the gauge indicates that the center of the hex is set on the bottom of the chassis. 

The “+” sign indicates that the hub is above the chassis, then the value in millimeters.

The “-” sign indicates that the wheel hub is below the chassis, then the value in millimeters.

Very simple!

Includes :

• 2 frame blocks
• 1x droop gauge
• Carrying pouch

*New 2024 blue design as shown in photo number 1. Design subject to change according to availability.