Rear lower wishbone stiffeners for Kyosho MP10&MP10e

Lower wishbone stiffeners for Kyosho MP10 and MP10e, compatible with all versions.

Gives more rigidity to your buggy's lower arms for greater precision, but also reinforces them to delay breakage.

In fact, we've designed a "sandwich panel" system that leaves the internal reinforcements of the suspension untouched, with a 1mm plate on top and a 1mm plate underneath.

Supplied with all the necessary mounting hardware (M2.5 screws and nuts), all you have to do is affix the plates to the arm and drill it using a 2.5mm drill bit.

Mounting is secure and remains rigid for a long time, unlike competing models which crack or the screws loosen and gradually lose their effectiveness.

Contents:

• 4x 1mm carbon plates to fit a pair of wishbones.
• 10x M2.5 screws
• 10x M2.5 nuts
• 20x 3D-printed washers for sandwich mounting