The transponder is an essential element to start competing in radio-controlled cars of all scales. This is indeed a key element: what will allow you to count your laps, and be used by the timing to rank you in the race. Whether mounted on the car or inside the radio assembly, it is advisable to mount it flat, and without disturbance. You should know that if your transponder is marked as functional in the warm-up laps, it is up to the organization to take charge of the manual entry of your data if it turns out that it becomes faulty during the race.
3 transponders models are currently available on the site. All 3 will have the possibility of viewing the times via the Speedhive smartphone app, as long as the counting is compatible and connected to an Internet source.
The RC4 transponder:
It is the cheapest model currently. It is compatible only with the latest generation RC4 counting loops (normally all clubs are more and more equipped with this technology, so in a regular basis you shouldn't have any compatibility problems)
- All your results in your personal profile
- RC4 transponders can be used for both indoor and outdoor racing and will perform on just about any surface
- Compatible with MYLAPS RC4 timing system
- Detection height: 15 cm / 6 in
- Dimension: 9 x 2 x 14 CM
- Max. speed: 120 km/h (75 mph)
- Operating voltage range: 3.0 - 16 V
- Temperature range: 0 to +50 °C /32 to +122 °F
- Timing resolution: 0,001s
- Warranty: 3 years
- Weight: 33g
The RC4 hybrid transponder:
Compared to RC4 model, this model works with all RC2, RC3 and RC4 counting loops. It is therefore the most versatile model, which will be compatible in all conditions and with all counting loops.
- All your results in your personal profile
- RC4 transponders can be used for both indoor and outdoor racing and will perform on just about any surface
- Compatible with all MYLAPS RC timing system
- Detection height: 15 cm / 6 in
- Dimension: 9 x 2 x 14 CM
- Max. speed: 120 km/h (75 mph)
- Operating voltage range: 3.0 - 16 V
- Temperature range: 0 to +50 °C /32 to +122 °F
- Timing resolution: 0,001s
- Warranty: 3 years
- Weight: 33g
The RC4 pro transonder:
The smallest transponder in the world, black with 8cm black wire. In operation, this model is the same as the red RC4 model, but it is 25% smaller than the classic RC4 transponder. It is the ideal model for use for on-road or in 1/10 off-road, because its lower profile and more aesthetic will suit perfectly with the look of your car!
- The RC4 Pro transponder is 25% smaller than the RC4 Transponder
- A shorter 8cm cable ensures a perfect fit every time
- It weighs only 30 grams
- All your results in your personal profile.
- RC4 transponders can be used for both indoor and outdoor racing and will perform on just about any surface.
- Compatible with MYLAPS RC4 timing systems.
- Detection height: 15 cm / 6 in
- Dimension: 11.8 x 2 x 10.8 CM
- Max. speed: 120 km/h (75 mph)
- Operating voltage range: 2.8 - 16 V
- Temperature range: 0 to +50 °C /32 to +122 °F
- Timing resolution: 0,001s
- Warranty: 3 years
- Weight: 30g
By Lefebvre 03/01/2025 01:13:34
Je voulais savoir j'ai une radio mhd quelle puce de contage il me faut je en 1/8 tt merci Cordialement monsieur lefebvre
View replies (1) -
By RSRC (account_circle Blog Author) 03/02/2025 23:54:12
Bonjour Il n'y a pas de lien entre la radio utilisée et le modèle de transpondeur. Nous vous conseillons le transpondeur Hybrid pour plus de polyvalence dans les clubs avec d'ancien systèmes de comptage non mis à jour
By RSRC 06/28/2021 16:51:05
Avec mylaps vous avez la possibilité d'avoir des numéros identiques pour toutes vos voitures, mais il vous faudra quand même équipé chaque voiture d'un transpondeur.
By RSRC 06/28/2021 16:46:04
Avec mylaps vous avez la possibilité d'avoir des numéros identiques pour toutes vos voitures, mais il vous faudra quand même équiper chaque voiture d'un transpondeur.
By Olivier 06/06/2021 00:25:02
Bonsoir Existe t il une possibilité de cloner une puce pour éviter d’acheter une puce par voiture Merci