Kyosho Speed House Mini-Z Multi-Cell Evo Charger

Multifunction charger/discharger equipped with a dedicated program, ideal for MiniZs, from beginners to racing users

The MINI-Z Charger EVO is a compact size that fits in the palm of your hand, but it is an ideal multi-functional charger/discharger for MINI-Z.

Covering everyone from users who enjoy the MINI-Z as a hobby to racing users who want to maximize battery performance.

Its most distinctive feature is that it is equipped with a total of five operating modes:

• Charge

• Discharge

• Cycle

• Analyse

• Battery management, and charging current (charging current for running use)

A multitude of settings:

• Maximum charging current of 1.5 A

• Maximum discharge current of 1.0A

• Delta cut-off voltage (delta peak) from 3mV to 15mV

• In addition, these settings are saved unless the charger is turned off and are applied to all locations, eliminating the need for problematic settings each time charging and discharging is done.

• USB Type-C (cable included), is easy to power from a mobile battery, is used for the input power terminal. (Fast charging or power supply is recommended)

This is a multi-cell charger equipped with various other functions, but it has various protection functions such as reverse connection protection / over temperature protection circuit / over capacity protection function and battery in simply inserting the battery.

Since it has a function to automatically detect the type and automatically start charging (when the setting is not manually changed), even beginners can handle it with confidence.

Original function only for SPEED HOUSE

• Charging capacity can be set and charging can be completed when the battery is charged to the specified capacity

• Charging can be completed when the charging voltage is set and the battery is charged to the specified voltage

• Record the average discharge voltage during discharge. By arbitrarily adjusting the discharge time, it is possible to select batteries with high discharge power according to the expected operating time

• The charge / discharge cycle can be set from 1 to 30 times

Important:

If you are a beginner, be sure to use the charging current and delta peak cut-off voltage with the initial settings. Both of these settings are intended for advanced users, so if you make a mistake, the battery may be damaged.

The discharge current can be set up to 1.0A, but since the resistance is fixed, it decreases with voltage.

You can use the XX650 lithium-ion battery with a total length of up to approx. 70 mm equipped with a safety device. Longer batteries will not fit into the slot and cannot be charged.