AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC
  • AS80945 RC8B4 Team Kit Team Associated 1/8 nitro Team Associated RSRC

RC8B4 Team Kit Team Associated 1/8 nitro

€699.00
Tax included

RC8B4 Team Kit Team Associated


AS80945

Data sheet

Car Type : Race kit
Quantity
  1 LEFT IN STOCK, LET'S GET IT ! 

Buggy 1/8 4WD Competition Team Associated RC8B4 Team Kit, world Champion 2022!

New Features:

  • Innovative front-end geometry with reduced kingpin inclination steering blocks places the wheel pivot in the center of the front tire for increased stability and consistent steering through the entire steering throw

Paired with a new wider upper suspension arm pivot

New gearboxes are specific to front and rear

Front gearbox features a 3.5 deg. inclined pinion gear angle to straighten the center driveshaft for increased drivetrain efficiency and reduced phasing and vibration

Rear gearbox features a 0 deg. pinion gear angle and center mounted rear chassis brace mount

Both gearboxes feature larger bearing sizes over RC8B3. Switching to a 6x13x5mm flanged bearing (from a 6x12x4mm non-flanged) results in longer life of bearings and ring and pinion gears

Reduced hardware on anti-roll bar cap for easy assembly and maintenance

Increased strength in common areas of part fatigue; particularly around the pinion gear and outer cap

  • New front upper suspension arm design

Designed to accommodate a wide range of flex and stiffness options

Optional inserts will be made available for fine tuning flex and stiffness and will fit on the top or bottom of the arm

Includes a molded "wing" insert for increased front-end downforce

Uses a replaceable molded hinge pin bushing to reduce slop and increase suspension dynamics

  • New front lower suspension arm design

Designed to accommodate a wide range of flex and stiffness options. Optional inserts will be made available for fine tuning flex and stiffness

New one-piece anti-roll bar link mounts in-line with the anti-roll bar with a BHCS instead of a shock pin for simplified assembly

Optional inserts mount to the top or bottom face of the arm--racers choice!

  • New rear suspension arm design

Designed to be of optimal flex and stiffness with no insert. However, optional inserts are available for fine tuning flex.

Optional inserts are available for fine tuning flex and stiffness and fit on the top or bottom of the arm

New angled one-piece anti-roll bar link is mounted in-line with the anti-roll bar with a BHCS instead of a shock pin for simplified assembly

  • New rear wing mount has adjustable wing angle shims, significant strength improvements, an aerodynamic shape, and extra clearance for shock position adjustment

Two wing height options are available to tune the rear downforce

Three wing angle positions: 0, -2, and -4 degrees.

The improved design also secures the wing mounting nuts so that they will not spin in the mount

The four wing mount screws into the rear tower access from the rear end of the buggy for simplified maintenance

New rear wing has more vertical fins for increased straight-line stability, a taller rear wickerbill height for increased downforce, increased strength in various areas to reduce bending fatigue, and dimples on the backside as a template for cutout holes

Two wing buttons are included for additional tuning options: the first is a traditional one-piece flat button and the second is a vertical stabilizing fin for even more straight-line stability

  • New rear chassis brace has several design features and flex options

Rear brace is mounted centrally to the gearbox, which reduces material fatigue, centralizes shear forces, and improves the life of rear end drivetrain parts

Has three different chassis flex options using two chassis hole mounting locations

1. Use both screws (most rigid).

2. Use one screw, long location.

3. Use one screw, short location (most flexible)

The upper brace joint has two flex tuning options at the gearbox

1. With included molded inserts that prevent twisting and only allow flex along the centerline pivot of the brace.

2. With optional turnbuckle ball for flex in more degrees of freedom.

Removable insert to customize the amount of flex in the brace

  • New +1mm offset rear hub features a symmetrical left and right common design with axle height inserts for adjustable roll center tuning

The standard bearing size used is an 8x16x5mm flanged but the hub will still accept 15x21x4mm bearing for CVA axle tuning options

  • New fuel tank with many new features

A new footprint to integrate with new steering bellcrank position

Optimized fuel tank capacity

Includes an ergonomically designed lid puller

Dash marks on the upper fuel tank half are measurement indications for quickly checking remaining fuel capacity after a session

Increased splash guard height

Longer lid pivot length results in a better closure and seal between lid and tank

Three stackable inserts are included for volume adjustment at sanctioned events

Specifications:

  • Power Source: Nitro
  • Terrain: Off-Road
  • Body Style: Buggy
  • Scale Size: 1/8 Scale
  • Assembly Level: Kit*
  • Length: 486mm (19.13in)
  • Width: 304.5mm (11.99in)
  • Wheelbase: varies
  • Weight: varies
  • Internal Gear Ratio: 2.50:1
  • Drive: 4WD

Required to Complete and not included:

  • 1:8 scale nitro motor (.21 class rear exhaust engine)
  • Exhaust system: muffler and header joining pack or muffler spring
  • 4.8V-7.6V receiver battery
  • Battery charger (suited for one of the batteries mentioned above)
  • 2-channel surface transmitter, 2-channel receiver
  • Steering and throttle servos
  • Lexan specific spray paint for body
  • 1:8 scale off-road wheels and tires
AS80945
 

Secured payment with Paypal, Credit Card, check or bank wire

  3 installments payments

from 100 to 3000€

 

Order before 3PM Paris time and get your order shipped today!

 

Worldwide shipping with a large range

  Loyalty Program

Coupons for every spent onsite

search

No question is available on this product.

But if in case you have any doubt you can raise your query.

Ask question

You might also like

RX battery ready to go with soldered plug Mugen/Ae/sworkz type

RX battery ready to go with soldered plug...

(1 review)
Price €39.90
  • Pack
PIC9396 Picco EFRA 2166 exhaust pipe with header Picco RSRC

Picco EFRA 2166 exhaust pipe with header

(16 reviews)
Price €89.90
Nitro starter kit. Fuel bottle, glow igniter, wheel wrench and tools

Nitro starter kit

(2 reviews)
Price €33.90
Sanwa MT-5 radio with RX493i receiver 2.4GHz with telemetry for RC

Sanwa MT-5 radio with RX493i receiver

(3 reviews)
Price €299.90